CUTTING OIL AND COOLANTS

Boasts of a range of long life chlorine free cutting oil and water soluble coolants.

EDM OIL

mineral

Daphne Magplus ED2P

Daphne Magplus ED2P is a high speed electric discharge machining oil formulated with highly refined paraffinic base oil and additives to improve electric discharge machining speed. In the field of electric discharge machining is economic efficiency, high efficiency from viewpoint of work environment, low odor, low viscosity and able to obtain good surface roughness. Daphne Magplus ED2P is the innovative that can meet the needs.

Application
It is electric discharge machining oil, recommended for precision electric discharge machining process.

Packing : 200L Drum

synthetic

Daphne Cut HL25

Daphne Cut HL25 is a high quality Electro-Discharge Machine (EDM) oil specially formulated with synthetic base oil to give unsurpass performance. This clear, transparent dielectric fluid is odourless and non-toxic, together with its low viscosity and high flash point, it helps to promote a safe and pleasant working environment.

Application
Recommended as a dielectric fluid for spark erosion machining operations (EDM use).

Packing: 20L Pail, 200L Drum

NEAT CUTTING OIL

Daphne Magplus SLA Series

Daphne Magplus SLA Series is a range of chlorine-free, non-active type of neat cutting oils to provide superior cutting performance and at the same time extend tooling service life for stainless steels, high tensile steels, carbon steels, and non-ferrous metals like: brass, copper and aluminium.

Application
Recommended for automated cutting operations in auto lathes & CNC machining centers and as well as low speed cutting operations like: threading, tapping and reaming of carbon steels, high tensile steels and non-ferrous metals.

Packing : 20L Pail, 200L Drum

Daphne Magplus MP Series

Daphne Magplus MP series is a range of chlorine-free, non-active type neat cutting oils specially formulated to provide superior cutting performance and at the same time extend tooling service life for non-ferrous metals like: brass, copper and aluminium and low carbon steels.

Application
Recommended for automated cutting operations in auto lathes & CNC machining centres and as well as low speed cutting operations like: threading, tapping and reaming of non-ferrous metals and low carbon steels. use)

Available grades : MP-10, MP-20 & MP-30
Packing: 20L Pail, 200L Drum

Daphne Magplus ST 25

Daphne Magplus ST 25 is an active neat cutting oil specially formulated for high precision deep-hole drilling of carbon steels and alloy steels and various continuous cutting processes on stainless steels. It is a chlorine-free oil formulated with paraffin base oils with various additives like: active E.P. additive and SR agent to provide excellent cutting performance.

Application
Recommended for:

1. Difficult to cut material like: carbon steels and alloy steels in gun-drill and BTA.

2. Continuous cutting processes of hard-to-shape material such as stainless steel in drilling, reaming and turning process with excellent surface finishing.

Packing : 20L Pail, 200L Drum

Daphne Magplus AM Series

Daphne Magplus AM series consists of three products in the neat cutting oil selection. The AM30 and AM20M are both non-active types of non-chlorinated cutting oils used for automatic lathing of non-ferrous metals. The AM20M does the job for stainless steel as well as non-ferrous metals. The AM20 is the sole active type in the AM series and is a form of non-chlorinated cutting oil for automatic lathing of both non-ferrous metals and stainless steel.

Application
Excellent as a cutting oil for carbon steels and alloy steels. Also suitable for cutting non-ferrous metal such as copper and brass. It is recommended for most cutting processes such as: auto-lathe work, turning, milling, threading and gear cutting.

Packing: 20L Pail, 200L Drum

Daphne Magplus DH 10A

Daphne Magplus DH 10A represents an active type of cutting oil that is non-chlorinated. It is best suited for gundrilling of steel.

Application
It is a deep-hole (gun drill, B.T.A) cutting oil for carbon steels and alloy steels.
1. DH 10 – mainly for carbon steel and alloy steel
2. DH 10A – mainly for hard to machine carbon steel and alloy steel (for example: forged parts)

Packing: 20L Pail, 200L Drum

DAPHNE COOLANTS

mineral

Daphne Milcool XL

Daphne Milcool XL is cutting oil formulated with special Idemitsu developed surfactant, emulsion destruction resistant additives and mineral base oil. This combination of superior additives and base not only results in superior cutting performance, it also provides extended cutting fluid life due to its strong resistant to fluid deterioration and bacteria growth.

Application
Recommended for general cutting on metals like aluminium alloy, carbon steel, alloy steel and etc.

Packing : 20L Pail, 200L Drum

Daphne Milcool AL

Daphne Milcool AL is a water-soluble, emulsifying cutting oil with various additives such as surfactants, anti-rust and anti-corrosion inhabitants

Application
Used for general cutting of ferrous metals, alloy steels and aluminium alloys.

Packing : 20L Pail, 200L Drum

Daphne Alpha Cool CS

Daphne Alphacool Cool CS is a water-soluble cutting oil that has high heat resistance properties. With minimal odour, stickiness and mist, it improves the work environment by a great value. It performs with both metal and non-metal products and has excellent defoaming properties making it suitable for both high speed and high pressure machining.

Application
This oil can be used as a general-purpose cutting oil for aluminium alloys, carbon steel, alloy steel, and copper by dissolving in water. Specifically, this product can be used for turning, drilling, and end milling. In addition, this product does not contain chlorine nor boron, making it environmentally friendly as well as worker-friendly.

Packing: 20L Pail, 200L Drum

synthetic

Daphne Alpha Soluble CZ

Daphne Alpha Soluble CZ is chlorine-free, transparent, synthetic chemical solution type water-soluble cutting oil. Its synthetic base is formulated to provide excellent lubricating properties and fortified with anti-bacteria, anti-rust additives and various cutting additives.

Application
Recommended for general cutting and grinding of carbon steels, alloy steels and special steels.

Packing : 20L Pail, 200L Drum

Daphne Alphacool EW

Daphne Alphacool EW is synthetic micro emulsion cutting coolant with long service life that is applicable to aluminum, carbon steel and alloy steel. It is also recommended for tapping and reaming of aluminum alloy.

•Exceptional Coolant Life
•Excellent Emulsion Stability
•Excellent Cutting Performance
•Prevents Rust

Application
Water soluble cutting oil recommended for alluminium, carbon steel and alloy steel. It is especially recommended for tapping and reaming of aluminium alloys. Furthermore, because it is non-chlorine type, there is no possibility of generating dioxin and corrosive chlorine gas during the processing of waste fluid.

Packing : 20L Pail, 200L Drum

Daphne Aquacool CC

Daphne Aquacool CC is a water soluble solution grinding oil that becomes transparent when mixed with water. It is highly effective in preventing foam, creating a clearer workspace for maximum efficiency.

Application
Recommended for grinding of cast iron, carbon steels, steel alloys and aluminium alloys.

Packing: 20L Pail, 200L Drum