Heat Treatment Oil

Line up of a diverse range of quenching oil which enhances cooling performance and extending longer service life.

COLD QUENCH

Daphne Master Quench A

Daphne Master Quench A is cold quenching oil formulated with highly refined mineral oil with specially selected additives such as cooling rate improver and oxidation inhibitor to provide exceptional oxidation and quenching performance.

Application
Recommended for use mainly in both Batch Type Furnace (Controlled-Atmosphere) such as bolts, chain, carbon tool steel parts etc. & Pusher Type Continuous Furnace such as carburizing parts, forged steel parts etc.

Packing : 20L Pail, 200L Drum

Daphne Bright Quench M

Daphne Bright Quench M is superior rapid and bright quenching oil with low vapour pressure. It is formulated with narrow cut base oil together with cooling enhancement additive and brightness additive to provide superior quenching performance in different types of furnaces ranging from batch to vacuum furnaces.

Application
Suitable for use in batch furnaces rapid quenching and also recommended for use in continuous and all case furnaces quenching where brightness and rapid quenching are required. It can also be used for rapid quenching in vacuum furnaces.

Packing : 20L Pail, 200L Drum

HOT QUENCH

Daphne Hi Temp Oil A

Daphne Hi Temp Oil A is a hot quenching oil formulated with highly refined mineral base oil with specially selected additives such as cooling enhancer which has excellent high temperature anti-oxidation contributes to longer oil service life.

Application
Recommended for use in Pusher type continuous furnaces especially for hardening automotive parts and Batch type furnaces for hardening of bearings and gears.

Packing : 20L Pail, 200L Drum

SEMI-HOT QUENCH

Daphne Hi Temp Oil L

Daphne Hi-Temp Oil L is a semi-hot quenching oil formulated with highly refined mineral oil with specially selected additives for increasing the hardness of core of thick carburizing steel and bearing steel SK or SKS materials, and also, prevention of distortion.

Application
Recommended for use mainly in :
1. For prevention of distortion of long bolts.
2. Carburizing bearings – taper roller bearings.
3. Thin plate spring.
4. Press quenching of thin parts.
5. Increasing the core hardness of thick carburizing steel.

Packing : 20L Pail, 200LDrum

Daphne Hi Temp Oil X

Daphne Hi-Temp Oil X is quenching oil formulated with highly refined mineral oil with specially selected additives which enable it to have properties of both adequate viscosity for hot oil quenching and moderate cooling power for cold oil quenching below 100°C of oil temperature.

Application
Recommended for use in quenching carbon or low alloy tool steel parts, bearing steel parts and other structural steel parts of small and medium size. Also recommended for use in both hot and cold quenching in a single atmosphere batch furnace.

Packing : 20L Pail, 200L Drum