Menu
A range of long-life press working oil for all types of press drawing and punching processes resulting in higher productivity and longer tool life.
Daphne New Punch Oil is a press working oil for the punching of silicon steel plates. It carries over the properties of Daphne Punch Oil with the addition of low odour and excellent drying properties.
Application
Recommended for punching, stamping, blanking, embossing etc. of silicon steel plate and carbon
steel plate where oil existence is undesirable on the progressive work.
Daphne Punch Oil AF-2A & 2C are odourless and self-drying type of punching/stamping oil for aluminium plates. It is formulated with low-viscosity synthetic volatile oil and special oiliness agent to give excellent performance.
Application
Recommended for stamping aluminium plates, press-forming the heat exchanger aluminium fins of air conditioners (for both automotive & domestic type) where oil existence is undesirable on the progressive work.
Packing : 20L pail, 200L drum
Daphne Punch Oil AF 3AS is a self-drying punching/ stamping and drawing oil for copper and aluminium plates. It is formulated with very low-viscosity synthetic volatile oil and various additives to give excellent performance.
Application
Recommended for punching, stamping, blanking, embossing etc. of copper and aluminium plates, press-forming the heat exchanger aluminium fins of air conditioners (for both draw and drawless types) etc where oil existence is undesirable on the progressive work.
Packing : 20L pail, 200L drum
Daphne Press Drawing S Series is a range of Chlorine-free press drawing oil specially formulated with purely refined mineral oil with extreme pressure additives and rust preventive additives etc. to provide excellent punching and drawing performance.
Application
Recommended for punching, drawing and forming of steel and stainless steel.
Available grades : 35, 55, 75, 115
Packing : 20L Pail, 200L Drum
Daphne Super Blanking SR 80 is an non-chlorinated blanking oil formulated with highly refined base oil and additives such as special extreme pressure agent and oiliness agent to give excellent performance.
Application
Recommended for stamping metal sheet like stainless steel and other materials.
Packing : 20L Pail, 200L Drum
Daphne Master Draw ND 30 is a press drawing oil for non-ferrous metals like: copper, copper alloys and aluminium. This low viscosity press drawing oil has been formulated with highly refined mineral base oil together with various oiliness agents to provide excellent drawing performance.
Application
Recommended for the drawing of copper and copper alloys wires and rod. It is also highly suitable for the press forming works on copper and aluminium plates.
Packing: 20L Pail, 200L Drum